Chevy is one of the most popular car models and they offer different types of models to customers. One of the models that they have is the Trax which is a mid-size car that is considered a compact car and it has a different model available with various features.
The Trax comes with many great features and customers can use this model for a long period because it is durable and offers great performance to its customers.
However, sometimes you might find an issue with your Trax’s steering wheel controls. It can be due to a damaged or worn-out cable or wire that connects the controls to the vehicle’s computer.
If you have found this issue with your Trax, you need to take the necessary actions to fix this issue. Below are the steps that will help you fix your steering wheel controls issue:
Replace the Fuse
If your Trax’s steering wheel controls are not working, you might find a damaged or worn-out fuse. You need to replace the fuse that is located under the steering wheel.
You will be able to access the fuse through its compartment in the dashboard of your Trax. To remove the old fuse, you need to remove its cover by using a screwdriver.
After that, you need to place a new fuse in the same location where the old one was located and put its cover back on it. You can also install new fuses in different locations depending on where your Trax’s controls were damaged or worn out.
Check for Issues with Wiring Connections
If your Trax’s steering wheel controls are not working, you might find that it is due to damaged or worn-out wiring connections. You need to replace the wiring connections with new ones to fix this issue.
You can easily do this by opening the compartment where your Trax’s steering wheel controls are located. You will be able to see all of its components and wires connected to them. Make sure they are not damaged or worn out.
If they are, you need to replace them with new ones. You can get new wiring connections at your local auto parts store.
Disconnect the Battery and Reconnect It After 5 Minutes
If your Trax’s steering wheel controls are not working, you might find that it is due to a damaged or worn-out battery. You need to replace the battery to fix this issue.
However, if you find that the battery is fine, try disconnecting it and reconnecting it after 5 minutes. Sometimes, the battery might lose power due to an interruption in the electrical current. You need to reconnect it after 5 minutes to fix this issue.
Check the Circuit Board
If your Trax’s steering wheel controls are not working, you might find that it is due to a damaged or worn-out circuit board. You need to replace this component to fix this issue.
You can get a new circuit board at your local auto parts store and then you need to connect it with all of its wires and components connected with them. This will help you fix your Trax’s steering wheel control issue.