Hyundai Kona is an electric crossover SUV that was introduced in 2017. The car is also known for its versatility and versatility, with its sporty look and an engine that delivers the perfect blend of performance and fuel efficiency. It’s one of Hyundai’s most well-known models. However, it is not without its faults.
For instance, car owners have reported the horn of the car being faulty. There is a possible reason for this as there are many reports that the horn of the car does not work. This can be quite a nuisance when you are driving and you need to honk your horn.
To find out whether your Hyundai Kona horn is working or not, read on to learn how to fix this issue.
Check if the wiring and relay is working properly
Before you go ahead and look for other reasons for why your Hyundai Kona horn does not work, it would be wise to check if the wiring is working properly in the first place. This will allow you to rule out other potential issues such as broken wires or loose connections.
You can do this by using a multimeter to test the various connections of your car’s electrical system. If you find that the connections are all in good condition, then this means that there is no problem with your car’s electrical system.
Check for a blown fuse
Another possible reason for why your Hyundai Kona horn does not work is that the fuse has blown. This could be due to an electrical short circuit or a problem with the fuse itself.
To check that the fuse has been blown, pull the fuse box with a fuse puller and hold it against the light. If the metal strip is broken in the middle, that means that a fuse has been blown. You must replace it with one that is one of the same type, with the same amperage.
Check the clockspring
This is another possible reason for why your Hyundai Kona horn does not work. Your Hyundai Kona has an electrical connector that is attached to your coil spring. It is a spiral cable that is wound around a special rotary electrical connector. The clock spring also contains delicate wires that are easily damaged during servicing, or they become damaged due to overuse if your vehicle has driven too many miles.
If the clockspring in your Kona is damaged, then other malfunctions of the system may also occur. Sometimes the airbag warning light in the instrument cluster may be lit, or some buttons on the steering wheel might stop working.
Check if the horn button is broken
One other possible reason for not functioning horns is the failure of the horn button that is on the steering wheel of your Hyundai Kona. If this is the case, over time, depending on how often the horn has been used, the button might wear out and cease to work. If you’re still not unsure after all these steps, then perhaps you should take your car to a professional.