Kia Ceed is a small family car with a powerful and safe engine. But in order to use it properly, we must learn how to use it correctly. If you are going to drive on your own, you will need to use the cruise control.
The Ceed is equipped with an electronic cruise control that can help you keep a steady speed while driving on the highway or in traffic jams.
The cruise control system can adjust the speed automatically according to the car ahead of you, but sometimes it doesn’t work correctly. In this article, we will show you how to fix the Kia Ceed cruise control problem by yourself.
Replace the Fuse
Once you locate the fuses that are connected to the cruise control, unplug them and start testing them. If a fuse is blown, you can replace it by adding a fresh fuse to the circuit.
But keep in mind that fuses are designed to prevent overcurrent currents from damaging the electrical components of a circuit. Remember that fuses are intended to protect against damage that can be done to your vehicle by a surge in power.
Sometimes fuses in your car may trip and cause some sort of problem, but even if the fuses are out of place, you are probably having an unsafe vehicle.
If you find that the fuses have burned out completely, you probably have a serious problem with your electricity.
Replace the Controller
The vehicle’s reshape controller is a small computer that controls how many different functions and features of the vehicle. Some vehicles use a different control module for cruise command.
Others merely revert to the control module that controls the engine. Whenever a computer problems with this module, the cruise control may not work properly.
If you don’t see any manufacturer recalls or service bulletins for any of those modules, it may be possible to simply change the controller that operates your cruise control.
Fix the Speed Sensor
Sensors on vehicles detect speed when they are activated. They give you a very clear indication of how fast the vehicle is accelerating. Speed sensors measure how quickly cars are moving.
If a speed-sensing device is malfunctioning, you may not know how much you are driving. In this case, the cruise control may fail to recognize that you are traveling too fast and may not detect that.
It may happen that a bad speed sensor causes the speedometer to quit operating.
Repair the Brake Pedal Switch
When there is a problem with the brake pedal or clutch, it may be as though the cruise control is not operating properly.
Step on your brake pedal or press your clutch button on your car with a clutch that’s not automatic, and the cruise control will stop operating when everything is functioning as it ought to.
If you have one or more of the parts that allow your vehicle to sense when you are stepping on the brakes, it could think that your car is thinking that you are continually stepping on the brakes And then the cruise control would not be activated.