Radios in Kia Forte are a wonderful way to make your driving experience a bit easier. If the stereo system in your Kia Forte suddenly quits functioning, it is a real hassle to have it out and drive around.
Even if your Kia Forte radio stops functioning as expected, you won’t enjoy having your music playing, but you might be able to help yourself by noticing some symptoms.
Radio in Kia Forte is a feature that many drivers appreciate. However, if your radio does not work, there are a few things you can do to try and fix the issue. In this article, we will discuss how to troubleshoot and fix a radio that is not working in a Kia Forte.
Switch the Fuse
Inside your Kia Forte is a switch that toggles between two different circuits. It may help to try turning the radio off and on and see if that does anything.
In order to try and reset the radio system, you can try to turn off your vehicle’s electrical system and then switch it back on. Some parts of the radio will need to be replaced, but other parts may be able to be replaced.
Press the Radio Down Button
If it does not work, try pressing the radio down button to try to force it to turn back on. If it still does not turn off, then you will have to get a new radio.
You may have a pinhole on the front of the radio where you can put a pen in to force the radio to start working again. Not every radio has the feature to reset it.
Reset the Radio
The very least you should do is unplug the radio from the vehicle and try to reset it. But if it still does not work, you will have to get a new radio.
If any of those things do not help, you might need to get a new radio. You can either get one from the dealer or get one from an aftermarket shop. Dealership or aftermarket.
Check the Radio Power
So, the first thing to do is to find out if power is being supplied to the clock on the radio. It could be that if there is no power going to the clock, that it doesn’t cause it to work. You can measure the voltage at the switches by using a voltmeter or a voltmeter. Test the battery using a simple test light or a voltmeter.
In other cases it may be a case of a blown fuse on the ignition switch or a blown fuse in the fuse box. It is possible that there is no power going to these components and the fuses are not working, but a certified repair facility may be able to test more thoroughly to discover the root cause.
If it is still happening, you will need to look at the voltage being sent to the fuses and try to identify where the power is coming from. It may be possible to get a fuse that is faulty by checking the voltage on the fuses.
If this is not the case, the problem may be further downstream. If it did not, it would be way up stream, and this would cause a serious problem long after the fuses are installed.